Discription:

Microfiber wiper is constructed from continuous filament microdenier polyester.These strong filaments have a high yarn-to dust contact surface area,ensuring excellent wiping efficiency.Furthermore,its wedge-shaped cross-section acts as squeegies for superior contact with surface to be cleaned,generating excellent absorbency and particulate entrapment.

Features:

-Laser sealed edge ensures ultra low lint and particle level

-Good absorbency and wiping efficiency

-High chemical resistance

-Ideal for cleaning scratch sensitive surfaces

Applications:
-Suitable for class 10-1,00 cleanrooms

-Cleaning for lens and sensitive surfaces in optical and display industies 

Technical Data:

Performance Characteristics

Basis Weight                       68±3gsm

(IEST-RP-CC 004 3)

Thickness                          0.13mm-0.19mm

Absorbency

(IEST-RP-CC 004 3)

Sorptive capacity                    200ml/m²

Rate                               ＜3.0sec

Contamination Characteristics

Nonvolatile Residue,NVR

(IEST-RP-CC 004 3)

IPA Extractant(100 ml IPA at ambient temp for 24hrs)                      0.31mg/g

DIW Extractant(100 ml DI water at ambient temp for 24 hrs)                0.20mg/g

FTIR        No Silicon Oil,Amide and DOP detected

Ion Content

(IEST-RP-CC 004 3)

Chioride (CI)                     0.00010mg/g

Nitrates (NO3)                   0.00001mg/g

Nitrite (NO2)                    0.00001mg/g

Sulphate (SO4)                   0.000850mg/g

Sodium (Na)                     0.00031mg/g

Potassium(K)                    0.00007mg/g

Magnesium(Mg)                    0.00006mg/g

Calcium(Ca)                       0.00010mg/g

Releasable Particles

APC (dry test:Helmke Drum) ≥0.3um    100 counts/pc/cfm

(IEST-RP-CC 003 2) 

NOTE

Data shown are typical values and should not be used as specifications.

Ordering imformation: